Geoff Greenfield Limited operates 2 types of 1/2 Metre Planers, the W500 with a cutting depth of 150mm and the Deep Cut W50DC with a cutting Depth of 210mm.
The required working sizes for this machine are approximately 2800mm High without the elevator fixed and 3400mm High with the elevator fixed, width of approximately 1800mm and a working gross weight of between 7 to 8 tonne depending on the planer used. Please note the working heights stated are minimum heights for the machine to fit, if the works are all at these restricted heights then a site visit would be required prior to works commencing.
Wirtgen W500
105 Horse Power / Operating weight 7 tonne
Width of cut 500mm / Maximum depth of cut 150mm
Complete with its own dual purpose lorry for transport to site and for use as a Tipper.
Wirtgen W50DC Deep Cut
125 Horse Power / Operating Weight 8 tonne
Width of Cut 50mm / Maximum depth of cut 210mm
Complete with its own dual purpose lorry for transport to site and for use as a Tipper.
